Tri-Tilt 16/25

Standard Features:

• Triple shaft seal and scraper bushing on clean-out rod *

• Long-wearing clean-out and pour rods

• Adjustable clean-out stroke for better mix control *

• PFTE, VITON and other seal materials compatible with MPI, TDI, and corrosive blowing agents

• 2 proximity switches * – PNP 3-wired D.C. current, normally open

• Orifice sizes: 0.5MM through 4.2 MM. Your specific sizes supplied with mix head

• Chemical and hydraulic ports: SAE straight thread O-ring fittings with JCI 37° flared ends

• Clean-out hydraulics separated from chemicals with one piece cylinder extension with windows

• Third stream color port (optional) for dosing system or recirculation system *

• MHR TRI Mix Heads can be customized to meet your requirements including custom seals

* Features exclusive to Patented Tri-Tilt Mix Heads

Flow Specifications — New Rated Values (cc/sec):

Bore: 16mm    Recirc Groove Area: 0.0789 in²

Mix Ratio    Min Throughput    Max Open Mold / Laminar    Max Closed Mold

1:1            245 cc/sec                1320 cc/sec                               2305* cc/sec

2:1            365 cc/sec                990 cc/sec                               1730* cc/sec

* May require a custom recirc groove for accurate pressure setting in recirculation mode at this flow rate.