MHR Inc [ Mix Head Repair and Sales ]

MHR Tri-Tilt Impingement
Mix Heads - For non-abrassive and abrasive applications

MHR's Tri-Tilt Head provides an improved chemical mixing action for the Polyurethane/Foam industry. Development of the Tri-Tilt Mix Head was done utilizing Computational Fluid Dynamics Technology. The computerized simulation of material flow through the orifices at high pressure and various tilted positions has allowed MHR's Tri-Tilt Mix Head to achieve nearly perfect mix in the mix chamber and as the material flows from nose nozzle into the mold. It was determined that these superior mix results could be accomplished through non-linear and non-coplanar impingement occurring along 3 independent axises.
The net result for the molding operation that uses MHR's Tri-Tilt Mix Heads is a highly improved, consistent, well-mixed laminar flow output with a consistent cellular structure throughout the finished product.
MHR's customers find significant improvement in their difficult-to-mold parts; we expect the same for you operation.

TRIPLE SHAFT SEAL AND SCRAPER BUSHING ON CLEAN-OUT ROD
LONG-WEARING CLEAN-OUT AND POUR RODS
ADJUSTABLE CLEAN-OUT STROKE FOR BETTER MIX CONTROL
PFTE, VITON AND OTHER SEAL MATERIALS COMPATIBLE WITH MPI, TDI, AND CORROSIVE BLOWING AGENTS
2 PROXIMITY SWITCHES - PNP 3-WIRED D.C. CURRENT, NORMALLY OPEN
ORIFICE SIZES: 0.5MM THROUGH 4.2 MM
YOUR SPECIFIC SIZES SUPPLIED WITH MIX HEAD
CHEMICAL AND HYDRAULIC PORTS: SAE STRAIGHT THREAD 'O' RING FITTINGS WITH JCI 37° FLARED ENDS. YOUR SPECIFIC SIZES SUPPLIED WITH MIX HEAD
CLEAN-OUT HYDRAULICS SEPERATED FROM CHEMICALS WITH ONE PIECE CYLINDER EXTENSION WITH WINDOWS
THIRD STREAM COLOR PORT (OPTIONAL) FOR DOSING SYSTEM OR RECIRCULATION SYSTEM
MHR TRI MIX HEADS CAN BE CUSTOMIZED TO MEET YOUR REQUIREMENTS INCLUDING CUSTOM SEALS

MODEL	SIZE/INCES			WT. LBS	MINIMUM THROUGH PUT		MAXIMUM THROUGH PUT				ADJ. STROKE MAX % CLOSE OFF
	A	B	C		OPEN & CLOSED MOLD		OPEN MOLD LAMINAR FLOW		CLOSED MOLD
					1:1 RATIO	2:1 RATIO	1:1 RATIO	2:1 RATIO	1:1 RATIO	2:1 RATIO
MHR TT 8/12	6.13	5.62	14.88	19	60 g/s	90 g/s	340 g/s	255 g/s	420 g/s	315 g/s	60%
MHR TT 10/14	6.91	7.48	16.85	35	100 g/s	135 g/s	460 g/s	345 g/s	1000 g/s	750 g/s	60%
MHR TT 12/18	7.29	7.71	19.03	44	160 g/s	240 g/s	760 g/s	570 g/s	2000 g/s	1500 g/s	60%
	A = HT B = W C = L